Using the trace cursors to check values
1
Under [Display], set the display to [XY+Value].
2
Set the display item to [Cursor].
3
Select
4
Select the target cursor(s).
Cursor C
You can manipulate the target cursor(s) using the
5
Select the X-Y waveform for which you wish to read values using the trace cursors.
XY1
6
Select the display format.
All CH
7
Press the
8
Press the
Key operation
9
Check the measured values at the C and D cursors.
Find Quality Products Online at:
[Trace]
under the cursor settings.
,
Cursor
D,
Sync
XY8
to
,
Target CH
SELECT
key to display the cursor icons.
SCROLL/CURSOR
keys to move the C and D cursors.
Moves the cursor left a large amount
(10 data points at a time).
Move the cursor right a large amount
(10 data points at a time).
Moves the cursor left a small amount
(1 data point at a time).
Move the cursor right a small amount
(1 data point at a time).
GlobalTestSupply
www.
1
1
3 3
4 4
9 9
SCROLL/CURSOR
SELECT
+
SELECT
+
SELECT
+
SELECT
+
X-Y Compositing
2 2
5 5
6 6
7 7
keys.
Moves the cursor 10000 data points to the
left.
Moves the cursor 10000 data points to the
right.
Moves the cursor 50 data points to the left.
Moves the cursor 50 data points to the right.
.com
sales@GlobalTestSupply.com
Need help?
Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?