Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 201

Performing Numerical Calculations
5
(When [Target CH]
Set the individual channel for which the calculation is to be performed.
6
(When [Type]
Under [Threshold], set the reference value.
See "Value entry method" (p. 9 ).
7
(When [Type]
Select the calculation method.
For information about the calculation methods, see "Numerical calculation formulas" (p. 2 00).
Total

Positive
Negative
ABS
>
8
(When saving the numerical calculation results)
Auto saving: Configure the settings in the
Manual saving: Under [Type], select
Find Quality Products Online at:
is set to a value other than
is set to [Usage ratio], [ON
is set to [Aggregation] or [Integration])
Calculates the difference between the integration or area enclosed by the zero position
and the part of the signal waveform where its amplitude is positive and the integration
or area enclosed by the zero position and the part of the signal waveform where its
amplitude is negative.
Calculates the integration or area enclosed by the zero position and the part of the
signal waveform where its amplitude is positive.
Calculates the integration or area enclosed by the zero position and the part of the
signal waveform where its amplitude is negative.
Calculates the integration or area enclosed by the zero position and the signal
waveform.
>
[Calc
GlobalTestSupply
www.
[All CH])
time], [OFF time], [ON count], or
8 8
[Numerical calculation results]
results]. (See p. 1 50.)
.com
[OFF count])
area. (See p. 1 46.)
sales@GlobalTestSupply.com