Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 148

Hide thumbs Also See for MEMORY HiLOGGER LR8450:
Table of Contents

Advertisement

When the auto-save with the wave data (binary) setting is enabled, the data can be recovered upon
recovery of communications with the wireless modules from communications disruption. However,
when the segment save is enabled, the system cannot recover data in files that have already been
saved after segmented.
The system can recover data acquired until only when the files to be currently being saved was
segmented.
When the auto-save with the text format is enabled, the system cannot recover data. The
instrument will save the data that were not able to be received due to communications disruption in
other files after communications are reestablished. The unreceived data will be saved in a file under
the new name with the characters
Example: When the name of the original file is AUTO0001.CSV
The instrument with no storage media inserted cannot recover data. (p.  4 09)
Data protection (When Z1007 Battery Pack is used)
The instrument will stop saving data when the battery starts to run out during auto-save operation
(Measurement will continue).
Media crash, which can occur because of system shutdown during saving operation, can be
prevented.
IMPORTANT
Hioki guarantees the operation of our optional SD Memory Card and USB Drive only. Operation
of any other storage media cannot be guaranteed.
Find Quality Products Online at:
[_R]
The instrument will save the unreceived data in the AUTO0001_R.CSV file.
GlobalTestSupply
www.
added to the end of the original filename.
.com
Saving Data
sales@GlobalTestSupply.com

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?

This manual is also suitable for:

Memory hilogger lr8450-01Lr8450Lr8450-01

Table of Contents