Configuring And Establishing A Usb Connection; Installing The Usb Driver - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Configuring and Establishing a USB Connection

9.2 Configuring and Establishing a USB Connection

This section describes how to connect the instrument to a computer with the accompanying USB
cable.
• You can configure the instrument's settings, record waveforms, and observe the recorded
waveforms with the Logger Utility. (p. 2 35)
• You can load data from an SD Memory Card to a computer. (p. 1 68)
• You can control the instrument using communication commands. (p. 2 92)
Install the USB driver before connecting the instrument to the computer for the first time.

Installing the USB driver

Install the USB driver as described below.
1
Execute an install file of the USB driver.
(Windows 7 or Windows 8)
Run [DriverSetupWin7Win8.msi]
If you have already installed the Logger Utility, you can run the file from the following location:
[c:\Program Files(x86)\HIOKI\LoggerUtility\Driver\DriverSetupWin7Win8.msi]
(Windows 10)
Run [DriverSetupWin10.msi]
If you have already installed the Logger Utility, you can run the file from the following location:
[c:\Program Files(x86)\HIOKI\LoggerUtility\Driver\DriverSetupWin10.msi]
*: Follow the procedure to install the Logger Utility. It will be installed in the
drive.
Find Quality Products Online at:
on the CD.
on the CD.
2
To change the installation location (not usually
necessary)
3
GlobalTestSupply
www.
[Program Files(x86)]
Click [Next].
Click [Browse...] and change the folder into
which to install the driver.
Click [Next].
The installation will begin.
.com
*
*
on the C
sales@GlobalTestSupply.com