Controlling the Instrument with Communication Commands
9.9 Controlling the Instrument with Communication
Commands
This section describes how to control and communicate with the instrument by sending
communication commands from a computer.
The instrument and computer must be connected using either a USB cable or a LAN cable.
See "Connecting the instrument to the computer with a USB cable" (p. 2 38).
See "Connecting the instrument to a computer with a LAN cable" (p. 2 47).
The instrument must be configured in order to control it using communication commands.
>
1
Press the
The settings window will open.
2
Under [Delimiter], select the communication command line feed code.
LF,
CR+LF
3
Under [Header], select whether to add a header to command responses.
OFF
,
4
Press the
The settings window will close.
For more information about communication commands, see the "Communication Command
User Manual" on the included CD.
Find Quality Products Online at:
>
2
2
3 3
ENTER
key while
[Command settings...]
ON
ENTER
key while
[Close]
GlobalTestSupply
www.
1 1
4 4
is selected.
is selected.
.com
sales@GlobalTestSupply.com
Need help?
Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?