Synchronizing The Time - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Synchronizing the time

This section describes how to synchronize the instrument's time with an NTP server.
The LAN settings must be configured in advance.
See "9.3 Configuring and Establishing a LAN Connection" (p. 2 39).
>
1
Press the
The settings window will open.
2
Set the
3
Under
OFF
Every hour
Every day
4
Under
before starting measurement.
OFF
5
Under
6
Press the
Once the settings have been applied, the instrument will connect to the specified NTP server and
set the time.
7
Press the
The settings will be applied.
Press the
settings.
Find Quality Products Online at:
>
2 2
3 3
4 4
5 5
ENTER key while [NTP settings...]
[NTP client function] to [ON].
[Sync timing], select when to connect to the NTP server and set the time.
Does not set the time.

Sets the time once an hour.
Sets the time once a day.
[Sync before start], select whether to connect to the NTP server and set the time
 , ON
[Server address], set the address of the NTP server.
ENTER key while [Sync now]
ENTER key while [Apply]
ENTER key while [Cancel]
GlobalTestSupply
www.
1 1
6 6
7 7
is selected.
is selected.
is selected.
is selected to close the window without changing any
.com
Controlling the System
sales@GlobalTestSupply.com