Numerical Value Display - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Observing Waveforms

Numerical value display

This section describes how to select the numerical value display method.
[Value] screen
This screen displays only numerical values.
1
Select the value to display.
All
Instant
Maximum*
Minimum*
Average*
P-P*
You can also select the value with the
To choose a setting other than [All], press and hold the
*: Does not apply to CAN channels.
2
Change the channel to display (as necessary) using the button on the top right of the screen
(example: [1/2]).
Find Quality Products Online at:
1 1
Instantaneous values, maximum values, minimum values, average values, and peak-
to-peak values
Most recent measured value (INST)
Maximum value (MAX) from the start of measurement to the current time
Minimum value (MIN) from the start of measurement to the current time
Average value (AVE) from the start of measurement to the current time
Difference between maximum and minimum value (peak-to-peak value) from the start
of measurement to the current time
SELECT
GlobalTestSupply
www.
key.
SELECT key to display comments.
.com
2 2
sales@GlobalTestSupply.com