Starting And Stopping Measurement - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

1.12 Starting and Stopping Measurement

When the
displayed. Press the
Starting measurement after stopping it will cause the measurement data in the instrument's internal
buffer memory to be deleted. Save important data on an SD Memory Card or a USB Drive before
starting measurement again.
Measurement operation
Press the
Measurement
Recording time
Time specified
(STOP key not pressed)
Time specified
(If the STOP
is pressed while
measurement is in
progress)
Continuous recording
Find Quality Products Online at:
Press the START key to start measurement.
Press the STOP key to stop measurement.
[Operation error prevention]
ENTER key while
• Measurement can also be stopped automatically at the set recording time.
See "1.3 Setting Measurement Conditions" (p. 1 8).
• You can prevent misoperation of the
See "7.1 Configuring Settings" (p. 2 12).
• You can start recording operation when specific conditions occur. This functionality is
convenient when you wish to monitor conditions for anomalies.
See "2 Trigger Function" (p. 1 13).
START
key. Press the
Set recording time
Repeat recording: OFF
Recording time
Measurement
Measurement Measurement
start stop
Recording time
key
Measurement
Measurement Measurement
start stop
Measurement
Measurement Measurement
start stop
GlobalTestSupply
www.
setting is [ON], an operation confirmation window will be
[Yes] is selected to start measurement.
START and STOP keys.
STOP
key.
Repeat recording: ON
Recording time
Measurement
Measurement start
Repeats processes until measurement stop.
Recording time
Measurement
Measurement start
(Same as when repeat recording is OFF)
Downtime
Measurement
Downtime
stop
Measurement stop
Downtime
.com
sales@GlobalTestSupply.com