5.2 Assigning Event Marks with an External Signal
You can assign event marks by inputting external signals.
This function must be configured before measurement begins.
>
1
Under
2
Under [Start], select the slope at which to assign the event mark.
↑
↓
3
Input the pulse to the input terminal (I/O 1 to I/O 3) with the
An event mark and number will be assigned at the edge of the entered pulse.
See "External control connections" in the Quick Start Manual and "8 External Control (EXT. I/O)"
(p. 2 23).
Find Quality Products Online at:
>
1 1
[External input 1]
to
[External input
Assigns the event mark at the pulse's rising edge.
Assigns the event mark at the pulse's falling edge.
High
(2.5 V to 5.0)
Low
(0 V to 0.8 V)
GlobalTestSupply
www.
Assigning Event Marks with an External Signal
2
2
3], select
[Event
input].
[Event input]
.com
setting.
sales@GlobalTestSupply.com
Need help?
Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?