Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 150

2
Under [Media], select the media to give priority when saving data.
SD card ,

When both an SD Memory Card and a USB Drive are inserted, the system will save data on the selected
media.
If the selected media is not inserted, the system will save data on the other media.
3
Under [Format]
OFF

Binary
Text
MDF(MF4)
(When [Format]
Under [Downsampling], select whether to perform downsampling.
When set to [ON], the size of the saved data file will be reduced.
OFF , ON

(When [Downsampling]
Under [Decimation
1/2 to 1/100,000

Example: If set to [1/5], 1 data point out of every 5 data points will be left.
(When [Downsampling]
Under [Save
Instant

Statistics
Under [Deleting], select the type of processing to perform if the media on which data is
being saved runs out of space (as necessary).
OFF

ON
Under [Folder
The folders in which data is saved can be segmented based on the set period of time.
Disable

1 d
1 week
1 month
Find Quality Products Online at:
USB flash drive
in the [Waveform data]
Does not perform auto-save operation.
Saves data in the instrument's dedicated format (binary format)
Saves data in text format.
Saves data in MDF format.
is set to [Text])
is set to [ON])
factor], select the decimation factor.
is set to [ON])
data], select the data thinning method.
Saves the first data point.
Example: With a setting of [1/5], only the first of each group of five data points will be
saved.
Saves statistical data (maximum value, minimum value, and average value).
Example: With a setting of [1/5], the maximum, minimum, and average values will be
saved for each set of five data points.
Ends auto-save operation.
Deletes the oldest waveform file and continues auto-save operation. If the system is
unable to delete a file, it will stop saving data. Numerical calculation results will not be
deleted.
splitting], select the timing at which to segment data (as necessary).
Saves in a single folder such files containing data obtained during the amount of time
set for recording. The folder will be segmented under the following conditions:
• When [File splitting]
Segments the folder by day.
• When the number of files in the folder has reached 1000:
Switches the save destination over to folders with a sequential number appended to
(for example, 19-12-23_0001).
Segments folders by day.
Segments folders by week. A week is defined as lasting from Monday to Sunday.
Segments folders by month.
GlobalTestSupply
www.
area, select the auto save type.
is set to [Disable]:
.com
sales@GlobalTestSupply.com