Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 34

5
(For the U8554 or LR8534 Strain Unit)
Under [Filter], select the cutoff frequency.
Auto
See the table in "Measuring strain" (p. 3 6) for a list of cutoff frequencies when
When measuring instrumentation devices
• When measuring a 4-20 mA current, connect a 250
input terminals.
See "Connecting voltage cables and thermocouples" in the Quick Start Manual.
• The
• The
range are automatically set to 1 V and 5 V, respectively. If you wish to change the upper and
lower limit values, use the
• The Strain Unit does not support 4-20 mA current measurement.
Find Quality Products Online at:
 , 120 Hz, 60 Hz, 30 Hz, 15 Hz,
[1-5 V] range is convenient when measuring output from 4-20 mA instrumentation devices.
[1-5 V]
range is a range in which the lower and upper limits of the
[10 V]
You can use the scaling function to convert measured voltage values to the desired values.
See "1.7 Using the Scaling Function" (p. 5 8).
GlobalTestSupply
www.
8 Hz, 4 Hz
Ω
resistor between the positive and negative
range.
Configuring Input Channels
[Auto]
is selected.
[10 V]
range's display
.com
sales@GlobalTestSupply.com