Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 98

6
(When
Press the
The search will be performed. If the search returns multiple points, you can move to the next point
with
(When
Press the
The search will be performed.
An "S" mark will appear at points returned by the search.
You can delete the search results by pressing the
You can move the A cursor or B cursor position to an "S" mark position by pressing the
while
the [Wave+Value]
See "(2) Cursor: A/B cursor values" (p. 8 7).
Find Quality Products Online at:
[Type] is set to [Level], [Window], [Maximal], or [Minimal])
ENTER key while either
[>] or to the previous point with [<].
[Type] is set to [Maximum]
ENTER key while [Search]
[A] [B] [Move cursor]
or under
screen.
You can search logic waveforms according to the
[Slope] set to [↑], searches for points that rise from the Low level to the High level.
• With
[Slope] set to [↓], searches for points that fall from the High level to the Low level.
• With
• The [NO DATA] points are excluded from the search targets.
GlobalTestSupply
www.
[<] or [>] under [Execute]
or [Minimum])
is selected.
ENTER key while
is selected. The screen will switch to the cursor display on
[Level]
.com
Observing Waveforms
is selected.
[CLR search] is selected.
ENTER
setting.
sales@GlobalTestSupply.com
key