Saving Data - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

3.3 Saving Data

Data can be saved using the following three methods:
If you wish to automatically
save data during
measurement
Auto save
Configure settings before starting
measurement.
Measurement data will be saved
while measurement is performed.
Calculation results will be saved
once measurement has stopped.
(p. 1 42)
Insert an SD Memory Card or
a USB Drive.
[Measure]
Enable auto saving (p. 1 42).
Set the type of data to save.
Data can be saved at the same
time.
• Waveform data
• Numerical calculation results
Measurement
Auto saving
To save part of a waveform, specify a range using the A/B cursors (vertical) before saving the data.
(Partial save functionality is not available when using the auto save function.)
See "Specifying a waveform range" (p. 9 7).
Find Quality Products Online at:
If you wish to save data
immediately when the
SAVE
Immediate save
Set the type of data to save in
advance on the
screen. You can save data
immediately by pressing the
key. This function is convenient
when you wish to save certain
waveform data or to save data
immediately during monitoring.
(p. 1 49)
Insert an SD Memory Card or
screen [Measure]
Set [SAVE key settings]
[Quick save]
Set the type of data to save.
• Waveform data
• Screen images
• Setting conditions
• Numerical calculation results
• A2L file
Press the
(Data cannot be saved while
measurement is in progress.)
GlobalTestSupply
www.
key is pressed
[Manual save]
SAVE
a USB Drive.
screen
to
(p. 1 49).
SAVE key.
Saving
.com
If you wish to choose the
type of data to save and
then save it
Selective save
(Default setting)
When you press the SAVE key,
you can set the type of data to
save and then save it.
There is no need to configure
settings before saving.
(p. 1 49)
Insert an SD Memory Card or
a USB Drive.
[Measure] screen
Set [SAVE key settings]
[Select & Save] (p. 1 49).
Press the SAVE key.
(Data cannot be saved while
measurement is in progress.)
Window
Select the type of data to save.
Set the save filename.
(Up to 8 single-byte characters)
• Waveform data
• Screen images
• Setting conditions
• Numerical calculation results
Press the ENTER key.
Saving
sales@GlobalTestSupply.com
to