Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 250

Configuring LAN settings
To communicate with the instrument over the LAN, configure the following settings:
[DHCP server]
•
If [DHCP server]
subnet mask.
OFF
ON
[Host name]
•
Specify the instrument's hostname.
String of up to 12 single-byte characters (example: LOGGER)
• [IP address]
Set the instrument's IP address.
_._._._
• [Subnet mask]
_._._._
[Port number]
•
Set the number of the TCP/IP port used by the instrument.
The last digit cannot be set as it is used by the instrument's firmware.
____
[Gateway]
•
[DHCP server]
If
OFF
• [Gateway IP]
If [Gateway]
_._._._
• [DNS]
Select whether to use DNS.
OFF
[DNS IP]
•
If [DNS]
_._._._
Find Quality Products Online at:
is set to [ON], the instrument will automatically acquire the IP address and
 Disables the DHCP function.
Enables the DHCP function.
(_: 0 to 255) (example: 192.168.1.2)
(_: 0 to 255) (example: 255.255.255.0)
(_: 0 to 9) (example: 880X)
is set to [ON], the gateway will be set automatically.
, ON

is set to [ON], set the IP address of the device that will serve as the gateway.
(_: 0 to 255)
ON
 ,
is set to [ON], set the DNS server's IP address.
(_: 0 to 255)
GlobalTestSupply
www.
Configuring and Establishing a LAN Connection
.com
sales@GlobalTestSupply.com