Other Adjustments
Adjusting the Rear Suspension
#
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Use the pin spanner and extension bar
provided in the tool kit (
adjuster. Position 1 to 2 are for a decrease
spring preload (soft), or turn the position 4 to
5 increase spring preload (hard). The
standard position is 3.
NOTICE
Attempting to adjust directly from 1 to 5 or 5 to 1
may damage the shock absorber.
NOTICE
Do not turn the adjuster beyond its limits.
Adjust both left and right shock absorbers to the
same spring preload.
P. 90) to turn the
2
1
2 3 4
5
Extension bar
Pin spanner
103