5.3 System; Parameters - YASKAWA MOTIONPACK-110 Descriptive Information

5.3 SYSTEM SPECIFICATION PARAMETERS
-5.3.1 SETTING AXIS FOR USE (#1000)
Motionpack-llO controls up to 4 axes (X, Y, Z, S), and the axes to be used are designated by
this parameter as follows:
#1000
D7 D6 D5 D4 D3 I D2 D1 DO
I
0 0
t $ Axis 1 (X) designated?
/
Axis 2 (Y) designated ?
Axis 3 (Z) designated ?
Axis 4 (S) designeted ?
Micro PC module ?
Communication function (DNC) ?
Set "1" for use, and "0" for non-use.
Set "0" for no designation.
(Example)
Using one axis (X) #1000 D7 D6 D5 D4 D3 D2 D1 DO
0 0 0 0 0 0 0 1
Using2axes_X Z_ _1000 O7100o 0°_0 O4o O3o O21Ol1001 0 1
(1) Parameter #1000-D4 is set only when there is a micro PC module, type JEFMC-B110.
(2) Parameter #1000-D5 is set only when there is a motion module with the communication
function, type JEFMC -C027.
86