YASKAWA MOTIONPACK-110 Descriptive Information page 179

9.1.2.2 Power Supply for PG
A 12 VDC power unit is necessary for feedback unit TFUE-[_DZC7 or TFUE-[B[NSAB.
A power unit meeting the specifications shown in Table 9.3 should be provided.
Table 9.3 Specifications for 12 VDC Power Unit
Item Specifications
Input Voltage 100/110 VAC, 50/60 Hz
Rated Voltage 12 V
Rated Current 200 mA (per 1 unit of PG)
Output Stability Less than + 5 %
Ripple Noise Less than 300 mVp-p
Leak Current Less than 0.5 mA
Overcurrent Protection Provided
Working Temperature 0 to +55°C
Storing Temperature -20°C to +80°C
Relative Humidity 30 to 90% (non-condensing)
t Input Withstand voltage: 1,500 VAC, 1 minute
Frame
Insulation Input _ Output
Resistance: Greater than 100 MfI at 500 VDC
I Output0 ' Frame
Example of model:
Type: AYS 1201
Manufacturer: Shindengen Kogyo KK
Input: 90 to 110 VAC, 47 TO 500 Hz
Output: 12 V, 1 A
As a compound power unit for both 5 V and 12 V, the following model is recommended.
Type: CYG 500/01
Manufacturer: Shindengen Kogyo KK
Input: 85to 132VAC,47to 63Hz
Output: 5V, 5A; 12 V, 2.5 A; -12 V, 0.4 A
167