YASKAWA MOTIONPACK-110 Descriptive Information page 267

APPENDIX-1 LIST OF ALARM CODES
(Cont'd).
,all
Code Contents Cause Corrective Action I
ABSO POSITION Reference value for ref. unit system Check the reference
093 OVERFLOW or pulse system exceeds value or parameter.
ERROR (X) ± 2147483647.(X axis) (X axis)
ABSO POSITION Reference value for ref. unit system Check the reference
094 OVERFLOW or pulse system exceeds value or parameter.
ERROR (Y) .T_+ 2147483647.(Y axis) (Y axis)
ABSO POSITION Reference value for ref. unit system Check the reference
095 OVERFLOW or pulse system exceeds value or parameter.
ERROR (Z) - 2147483647. ( Z axis) (Z axis)
DNC ERROR Machining program reading Check the program for
100 error during DNC operation DNC operation transfer.
Check the parameter.
In data transmission to/from personal Turn power on again, d
200 computer, buffer becomes full, and Change the program.
input is disabled.
Transmission error between motion If the error occurs again after
255 and axis modules power is turned on, notify
maintenance personnel.
256