Program Erase - YASKAWA MOTIONPACK-110 Descriptive Information

7.5.4 PROGRAM ERASE [_
Program erase (new or registered program) is all performed in edit mode by
function. The program can be erased in unit of character, program or whole programs.
(1) Erasing Characters
Set the cursor to a character to be erased and depress the _ key. Only that character
will be erased.
(2) Erasing Program Numbers
Enter the program number
"
[_r-Tr-Tr-Tr-7 " []
...... and depress the key.
L_ JL_-IL_ jL_J
The program number just entered and its program will be erased.
D (3) Erasing All Program Numbers
Depress the [_ [_ @ [9] _] and [-_ keys and depress the _ key.
All the programs registered will be erased.
7.5.5 SEARCH FUNCTIONS
Data (character string) entered by the keys on the NC operator's station with CRT are
collated with data (character string ) in the memory and displayed on the CRT.
(1) Method of Operation
1. Select EDIT mode.
2. Depress _ function key.
Depress [_ key.
3.
The beginning of program number will be set.
4. Enter the data to be searched (a character string of not more than 10 alpha-numerical
characters).
5. Depress _ key.
Search is started and "AS" is displayed at the bottom of the CRT during search.
(2) Completion of Search
1. When the search is completed, "AS" disappears, the head of the data searched is
specified (indicated by cursor) and the searching operation stops.
2. If the desired data cannot be found, "AS"disappears and, at the same time, "NOT
FOUND!" is displayed on the CRT. This display can be erased by depressing
[_key on CRT control station.
145