Of Memory Operation - YASKAWA MOTIONPACK-110 Descriptive Information

11.1.10 CONFIRMATION OF MEMORY OPERATION
,din
To check the memory operation, perform the single blockoperation, q
I ® I ....
Perlocmthe return-to-reference pointoperation.
Set to memory operation mode. I
Upon completion of program,execute M30.
I
Set to single block. (Turn on "SBK" signal). I
I
Turn off the single block and operate continuously,
Designatethe program number. ,
Designate a program number and turn 1 on the start signal.
I
I Turn on the start signal and execute the program.
I
Execute one block of program and stop. 1
-I I _°°'_e°'_r_'°''s'°° I I
Turn on the startsignal again. _ Completion of MemoP/ Operation )
I
Fig. 11.9 Confirmation of Memory Operation
230 I
J