YASKAWA MOTIONPACK-110 Descriptive Information page 178

9.1.2.1 Power Units for Motion Modules, Axis Modules and Micro PC Modules Cont'd)
Example of model:
(1) Type:EY05005
Manufacturer: Shindengen Kogyo KK
Input: 85 to 132 VAC, 47 to 63 Hz
Output: 5V, 5A
(2) Type: BY05011
Manufacturer: Shindengen Kogyo KK
Input: 85 to 115 VAC, 47 to 440 Hz
Output: 5 V, 11 A
Where axis module is used for spindle, _+10 V output is applied. In this case,
--+15 VDC power unit is required. Table 9.2 shows the specifications for --+15 VDC power
unit.
Table 9.2 Specifications for+ 15 VDC Power Unit
Item Specifications
InputVoltage 100/110 VAC, 50/60Hz
RatedVoltage _+ 15V
RatedCurrent _+ 20mA
OutlSut Stability Less than +5 %
RippleNoise
Less than 300mVp-p
Leak Current Lessthan0.5mA
Overcurrent Protection
Provided
Working Temperature 0 to +55°C
Storing Temperature -20"C to +85"C
RelatiyeHumidity 30 to 90 % (non-condensing)
Input---* Frame
Withstand voltage: 1,500 VAC, 1 minute
Insulation Input _ Output
Resistance: Greater than 100 MEI at 500 VDC
0u_ut *----- Frame
• Example of model:
(1) Type: BYG 800/01
Manufacturer: Shindengen Kogyo KK
Input: 90 to 129 VAC, 47 to 63 Hz
Output: +5V, 10A
+5 to +15V, 1A
-5 to -15V, 1A
Working Temperature:
• Natural air cooled - 0 to 50°C
• Forced air cooled - 0 to 60°C
(2) Type: BYG 430/01
Manufacturer: Shindengen kogyo KK
Input: 90 to 129 VAC, 47 to 63 Hz
Output: +5 V, 5.5 A
+5 to +15 V, 0.5 A
1 66
-5 to -15 V, 0.5 A