Table Of Contents - YASKAWA MOTIONPACK-110 Descriptive Information

CONTENTS
3. FUNCTIONS 22
3.1 TYPES OF OPERATION MODES 22
3.1.1 Editing Mode (EDIT) 22
3.1.2 Memory Operation Mode (MEM) 23
3.1.3 Jogging Mode (JOG) 23
3.1.4 Step Operation Mode (STEP) 23
3.i.5 Rapid Traverse Motion Mode (RAPID) 23
3.1.6 Manual Feed Mode (HANDLE) 23
3.1.7 DNC Operation Mode (DNC) 24
3.1.8 MDI Operation Mode (MDI) 24
3.2 MANUAL RETURN TO REFERENCE POINT 24
3.3 FEEDRATE 26
3.3.1 Rapid Traverse Rate 26
3.3.2 Interpolation Feedrate Setting (F-FUNCTION) 27
3.4 FEEDRATE ACCELERATION/DECELERATION 29
3.4.1 Acceleration/Deceleration During Rapid Traverse and Jogging 29
3.4.2 Acceleration/Deceleration During Interpolation Feed 30
3.5 MEMORY OPERATION 30
3.5.1 Program Designation and Starting 30
3.5.2 Temporary Stop 31
3.5.3 Single-Block Operation 3i
3.5.4 Machine Lock Operation 31
3.5.5 Axis Omission 32
3.5.6 Optional Block Skip Function 32
3.5.7 Manual Interruption of Automatic Operation 32
3.5.8 Block Preread 32
3.6 DNC OPERATION 33
3.7 UNRESTRICTED LENGTH POSITIONING 33
3.8 POSITION CANCEL 33
3.9 POSITION MEMORY 34
3.10 MECHANICAL HANDLE 34
3.11 SPINDLE CONTROL FUNCTION 34
3.11.1 Normal Rotation, Reverse Rotation, and Stop of Spindle 35
3.11.2 Spindle Gear Change 35
3.12 MDI OPERATION 36
3.12.1 Program Input in MDI Mode 36
3.12.2 Operation in MDI Mode 36
3.13 ADDRESSSEARCH FUNCTION 36
3.14 PARAMETER/PROGRAM PROTECT FUNCTION 37
3.15 ALARM CODE OUTPUT FUNCTION 38 21