YASKAWA MOTIONPACK-110 Descriptive Information page 152

7.3 DISPLAY AND WRITING PARAMETERS [_ (Cant'd)
Parameter numbers of bit display type are #I000 through #1009. Parameters
larger than #Ii00 are of decimal digit display type.
PARAMETER 00000 N0000
_1550 1410065407
;:1551
_1552 4096
W1553 0
_1554 0
;:1555 65536
;:1556 5000
;:1557 167772160
;:1558 1677721
;:1559 0
RDY
PARAMETER
?
• E1001 1 0 0 1 1 1 1 1 159
_1002 1 0 0 0 0 0 0 0 128
;:1003 0 0 0 0 0 0 0 0 0
;:1004 0 0 0 0 0 0 0 0 0
;:1005 0 0 0 0 0 0 0 0 0
;:1006 0 0 0 0 0 0 0 0 0
;:1007 0 0 0 0 0 0 0 0 0
;:1008 0 0 0 0 0 0 0 0 0
_1009 0 0 0 0 0 0 0 0
RDY
585-219 585-220
iFig. 7.19 Example of Parameters Fig. 7.20 Example of Parameters
(Bit Display Type) (Ordinary Digit Display Type)
(3) Display of Parameters
(a) Key in the parameter number and depress key or key. However, keying
of "'#" is not required. A maximum of ten sets of parameter numbers and the
contents can be displayed simultaneously.
,.. N
(b) Designation of parameter number can be updated by key or key, and the
ClOT screen can be updated by key or _ key.
(4) Writing Parameters
Set the optimum values of parameters suited to the performance and purpose of the
machine.
(a) F_r bit display type
1. Designate the parameter number to be written.
2. Depress _ key.
Cursor will move from parameter number to bit display, and the bit position of D7
is first designated.
3. Depress _ key.
The cursor will be shifted by 1 bit toward the bit position of DO evey time the key is
depressed. Thus, move the cursor to the bit position to be altered.
4. Depress _ key.
The designated bit data will be inverted in this way: "0" __"1". If the key is
depressed again, the data will be inverted again.
140
!