Ip Max-Arp-Entries - Avaya G450 Cli Reference Manual

CLI Commands
To flush a range of ARP entries belonging to one subnet:
G450-001(super)# clear arp-cache 156.3.2.33 255.255.255.0
Flushing ARP cache entries in the range [156.3.2.33, 255.255.255.0]
Flushed 0 ARP entries.
Related Commands
arp, arp timeout,

ip max-arp-entries

Use the ip max-arp-entries command to specify the maximum number of ARP cache
entries allowed in the ARP cache. Use the no form of this command to restore the default value.
In order for this command to take effect, you must copy the running configuration to the startup
configuration and reset the device.
Syntax
ip max-arp-entries value
no ip max-arp-entries
Parameters
Parameter
value
User Level
read-write
Context
general
Example
To set the maximum number of ARP cache entries to 8000:
G450-001(super)# ip max-arp-entries 8000
172 Avaya G450 CLI Reference
ip max-arp-entries, ip
Description
The maximum number of entries allowed in
the IP address table. When you decrease
the number of entries, it may cause the table
to be relearned more frequently. If you do
not enter a value, the current ARP Cache
size is displayed.
proxy-arp, show ip arp, show ip reverse-arp
Possible Default
Values Value
128-16384 4096
ARP table