Wan Configuration, Verifying; Wan Ethernet Port Configuration - Avaya G450 Cli Reference Manual

Roadmap

WAN configuration, verifying

Table 106: WAN configuration verification CLI commands
Command
show controllers
show frame-relay fragment
show frame-relay lmi
show frame-relay map
show frame-relay pvc
show frame-relay traffic
show interfaces
show map-class frame-relay

WAN Ethernet port configuration

Table 107: WAN Ethernet port configuration CLI commands
Root level command
interface
FastEthernet
152 Avaya G450 CLI Reference
Description
Display status information about a controller interface
Display frame-relay fragmentation statistics and
configuration on all PVCs, all PVCs associated with an
interface, or a specific PVC
Display LMI statistics for a particular interface or for all
interfaces. The output displayed differs depending on
the type of interface.
Display a summary table of frame relay sub-interfaces
and DLCIs associated with the sub-interfaces
Display detailed PVC information
Display frame-relay protocol statistics, including ARP
requests and replies sent and received over frame relay
interfaces
Display interface configuration and statistics for a
particular interface or all interfaces
Display the map-class frame relay table
First level command
autoneg
duplex
Description
Enter interface FastEthernet configuration mode
Set the port speed and duplex to auto-negotiation
mode
Set the duplex setting (full or half) for the
interface
1 of 2