Show Ip Arp - Avaya G450 Cli Reference Manual

Related Commands
arp, arp timeout,

show ip arp

Use the show ip arp command to display the Address Resolution Protocol (ARP) cache.
Syntax
show ip arp
Parameters
Parameter
interface
ip_interface
ip_addr
ip_mask
static
User Level
read-only
Context
general
Example
To display all ARP mappings:
G450-001(super)# show ip arp
To display one host ARP mapping:
G450-001(super)# show ip arp 192.168.49.1
To display a range of ARP mappings:
G450-001(super)# show ip arp 192.168.49.1 255.255.255.0
To display ARP mappings for the VLAN 1 interface:
G450-001(super)# show ip arp "Vlan 1"
clear arp-cache, ip proxy-arp,
[interface|ip_interface|ip_addr[ip_mask] | static]
Description
The interface name, in quotes
The IP interface name, in quotes
The IP address of the station(s)
The IP mask of the routes
Keyword that specifies to display
static IP ARP information
show ip arp, show ip reverse-arp
Possible Values
string (1-32 chars)
string (1-32 chars)
ARP table
Default
Value
Issue 1 January 2008 173