Table of Contents
Advertisement
1-3-20
Setting - General(2) Screen - Part 1
1
2
3
4
1
Pause after changeover
If this is checked, the machine pauses after
changeover and then it starts feeding.
2
Show the confirmation dialogue for the
reprint list at the end of job
If this is selected, and there is a jam and a reprint is necessary,
the confirmation window is displayed at the end of the job.
If the OK button is pressed, the desktop printer will
print the reprint list. The reprint jobs are selected
automatically and the list cannot be changed
according to the current setting of error recovery.
If you want to select the reprinted sheets, click
"Cancel" and edit the reprint list (See page 89.)
If "Show this dialogue ..." is not selected, this
confirmation dialogue will not be displayed.
SmartStacker User's Manual
Finishing Line Controller Screen Descriptions
3
The pieces delivered in downstream than
jammed sheet are regarded as good pieces
If this is checked, the pieces delivered in downstream than
jammed sheet are regarded as good pieces. Jam icons
are not marked for those pieces in the reprint list. Those
pieces are delivered to the uncompleted box. If the sheet
is selected for the Error recovery, those pieces are omitted
from the sheets to reprint that are automatically selected.
Use this function if you do not want to waste the sheets.
You have to check the delivered pieces thoroughly
because folded or wrongly trimmed pieces may be
included.
4
Shutdown PC automatically when FLC closed
If this is checked, the PC that is installed with the
FLC shuts down automatically when the Exit button
of the FLC is pressed.
99
Advertisement
Table of Contents
