Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-7
Run - Main Screen - Part 7
1
Status
The status of each job is displayed here.
A job cannot be sent to the machine.
There is a problem with the JDF (Job
Definition Format) data.
This job is incomplete due to an error
and is waiting for reprint.
(Gray)
The job has been stopped by
clicking the stop button, or due to an
error.
The machine is doing a changeover
for the job.
The job is running.
This job is ready for running.
(Green)
This job is complete.
86
1 2
The job starts to run but the sheets
are not fed yet.
If the machine is in a near line
system and running continuously the
several jobs of same size, this icon
shows the current status of job.
2
Submitted
When used in a Near Line system -
This displays the date when the FLC (Finishing Line
Controller) received the job from the DFE (Digital
Front End).
When used in an Inline system -
This displays the date when the FLC (Finishing Line
Controller) received the job from the press.
3
Reprint Display
If a job stops due to an error,
here. This means that the job must be reprinted.
4
Percentage Complete
The progress of the job is displayed here.
SmartStacker User's Manual
3
4
mark appears
Advertisement
Table of Contents
