Table of Contents
Advertisement
SmartStacker Screen Descriptions
1-2-11
Run - Fine Adjustment Screen - Part 1
The sheet feeder is optional.
3
4
5
1
Sheet Feeder Table Guide Position
The table guide position can be adjusted here. The
tail edges of the sheets are registered by this guide
when they are loaded into the table.
2
Sheet Feeder Suction Head Position
The suction head position can be adjusted here.
Position the suction head so that the set register pin
of the suction head fits against the tail edge of the
stack of sheets.
3
Sheet Feeder Rear Guide Position
The rear guide position can be adjusted here.
4
1st Regist Unit Register Guide Position
The register guide position can be adjusted here.
The sheets move to the rear and are positioned by
this guide.
5
2nd Process Unit Gate Position
The blank page ejecting gate position can be
adjusted here. When the pages are delivered to the
waste tray, if the edges hit the gate and jam, adjust
the position of the gate.
38
Option
6
Merge Conveyor Upper Stopper and
Angle Adjusting Guide Position
The upper stopper and angle adjusting guide
position can be adjusted here.
After the sheets were delivered onto the transport
roller section and turned the direction, they are
aligned with the angle adjusting guide while they are
transported through between the stopper and the
angle adjusting guide.
Adjust the guide if the sheets from upper section and
the sheets from lower section of Merge Conveyor are
regularly misaligned in a stack.
7
Merge Conveyor Lower Stopper and
Angle Adjusting Guide Position
The lower stopper and angle adjusting guide position
can be adjusted here.
After the sheets were delivered onto the transport
roller section and turned the direction, they are
aligned with the angle adjusting guide while they are
transported through between the stopper and the
angle adjusting guide.
Adjust the guide if the sheets from upper section and
the sheets from lower section of Merge Conveyor are
regularly misaligned in a stack.
SmartStacker User's Manual
1
2
6
7
Advertisement
Table of Contents
