5
Place the reprinted sheets in the Sheet Feeder. (In this example, these are sheets
No. 4, 5 and 6.)
6
Run the job again.
This means that there is a job just for the reprinted sheets.
If you want to hold the job
1
Remove the sheets as shown on page 363.
2
Remove the sheets remaining on the Sheet Feeder. (In this example, these are
sheets No. 7 and 8.)
• Keep these sheets. They will be used later.
3
Press the OK button on the Error screen.
➡ The job is stopped. You can run another job while you are waiting for the reprint.
SmartStacker User's Manual
Reprint - When using the Merge Stacker
First Job
Job for Reprinted Sheets
135