Examples:
When stacking books
Five blocks are delivered,
using offset stacking.
Four pages in one block
When stacking postcards
No entry for the
number of pages in
each block.
3-1-3
Starting a Job
1
Load the sheets and raise the feed table. (See page 118.)
➡ When the feed table sensor detects the upper surface of the stack, the feed table stops automat-
ically. The suction head is then lowered.
2
Press the Motor/Feed Start button.
➡ The air pump starts and the suction head picks up the top sheet. The sheet is fed and the ma-
chine processes the sheet.
➡ The cut sheets are stacked and delivered according to the delivery setting.
3
Press the Motor/Feed Stop button to stop the
sheet cutting operation.
4
Before you turn the power off after finishing the
operation, lower the feed table to the floor.
SmartStacker User's Manual
Setting the Control Panel - When using the Merge Stacker
pieces/hr
5
4
pieces/hr
Delivery stops after
feeding 10 blocks
0
10
0
5
0
4
All of the blocks are
stacked without offsetting.
When the top of the stack
reaches the upper limit,
the stack is delivered.
155