Problems with the Sheet Feeder
Problem
The double feed stop
plate is too high.
The sheet tail hold-down
bars are producing too
much pressure.
The air guide or sheet
hold-down bars are
preventing the sheet from
feeding.
The blower air outlet is
too high.
358
Possible Cause and Solution
26030
40401D1
26030
40401E1
Sheet Hold-down Bar
Air Guide
26030
40401F1
Blower Position
Adjusting Knob
26030
40401G1
Blower Pressure Lever
• Set the double feed stop plate in a lower
position.
(See page 189 for details.)
• Reduce the distance between the sheet
tail hold-down bars.
(See page 181 for details.)
• Adjust the air guide and sheet hold-down
bars so that they do not hold the sheets as
much.
(See page 184 for details.)
• Set the blower air outlet in a lower
position.
(See page 183 for details.)
SmartStacker User's Manual