Table of Contents
Advertisement
5-3
Adjusting the Guide Positions
5-3-1
Adjusting the Register Guide for the 1st Regist Unit
Run - Fine Adjustment Screen
• If a sheet hits against the register guide and
causes jam, increase the value for the register
guide .
• If a sheet is not aligned with the register
guide and causes skewed cutting, first of all,
check if the piled sheets are fit with the table
guide. If the sheets are OK, decrease the
value for register guide.
196
Important
The cutters in the 1st Process Unit are
automatically adjusted to match the register
guide position.
SmartStacker User's Manual
Register
Guide
Advertisement
Table of Contents
