Horizon Fitness SmartStacker User Manual page 257

Code
Braking transistor error
(Amplifier display: rH3)
The frequency of the command pulse inside the
3533
servo amplifier is high.
2. 00 [MHz] or a higher frequency is detected at
the inlet of the position deviation counter inside
the servo amplifier.
Inverter no response
(Inverter display: N/A)
3540
The communication connection between the
servo amplifier and the control board P109512
(QPM-290) for the 2nd regist unit has not been
established.
Servo amplifier communication failure
(Amplifier display: N/A)
3541
The communication is not stable. A
communications data error occurred.
Drive power undervoltage
(Amplifier display: N/A)
3542
The voltage of the power supplied to the servo
amplifier is insufficient.
No error codes
(Amplifier display: N/A)
3550
An unexpected error occurs on the servo
amplifier.
(An error which does not correspond to any of the
errors 3501 through 3549 has occurred.)
A221 Transport Servo Amplifier 2: 3600-3699
Overcurrent 1
(Amplifier display: oc1)
3601
The output current of the servo amplifier exceeds
the rated value. Direct detection by internal
transistor of servo amplifier
Overcurrent 2
(Amplifier display: oc2)
3602
The output current of the servo amplifier exceeds
the rated value. Indirect detection with software of
servo amplifier
Overspeed
(Amplifier display: oS)
3603
The rotation speed of the servo motor exceeds
1.1 times the maximum speed.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
If this error occurs frequently, call your local
dealer.
Check if Q220 breaker is not tripped.
Check if Q220 breaker is not tripped.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
Solutions
257