Table of Contents
Advertisement
Reprint - When using the Merge Stacker
3
Remove the sheets shown below.
You can use the stack on the
completed conveyor. (This
includes the cut pages from
sheets No. 7 and 8.)
➡ A confirmation message is displayed on the screen of the FLC.
4
Click the OK button.
Editing the reprint list
1
Click the Cancel button on the
Confirmation screen shown above.
Select the job and click
2
➡ The Reprint List screen is displayed.
• The stacks, blocks and sheets which are
marked should be reprinted. You can also
add or delete the marks yourself.
Attention
• Clicking print in this process is to print
reprint list only.
• The sheet to be used for job must be
reprinted on upstream Press. Follow the
instructions of the press.
➡ The reprint list is printed by the desktop printer that has been selected by the FLC.
➡ Once the selected sheets (No. 4, 5 and 6 in this example) have been reprinted by the press, the
job is returned to the list of Pending jobs.
134
Important
Before doing this step, select "Stack" as
the unit used reprinting. See page 96 for
details.
.
Sheet
Block
Stack
SmartStacker User's Manual
Advertisement
Table of Contents
