Horizon Fitness SmartStacker User Manual page 259

Code
Encoder communication error
(Amplifier display: Ec)
3613
Communications with the internal encoder of the
servo motor fails.
CONT (control signal) error
(Amplifier display: ctE)
3614
The parameter stored in the servo amplifier is
incorrect.
Overload 1
(Amplifier display: oL1)
3615
The servo motor is mechanically locked.
Overload 2
(Amplifier display: oL2)
3616
The servo motor is mechanically locked.
Main power undervoltage
(Amplifier display: LvP)
3621
The power supplied to the servo amplifier falls
below the minimum specification voltage limit.
Internal braking resistor overheat
(Amplifier display: rH1)
3622
The power consumption of the braking resistor
built in the servo amplifier exceeds the upper
limit. (Detection is made at the internal electronic
thermal relay of the servo amplifier.)
External braking resistor overheat
(Amplifier display: rH2)
3623
The external regeneration resistor is overheated.
Braking transistor error
(Amplifier display: rH3)
3624
The regeneration handling transistor built in the
servo amplifier is damaged.
Deviation overflow
(Amplifier display: oF)
3625
A position deviation amount equivalent to servo
motor revolutions specified in deviation detection
overflow value is accumulated inside the servo
amplifier.
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
Check that nothing is preventing the transport
belts from moving at the 2nd regist unit. If this
error occurs frequently, call your local dealer.
Check that nothing is preventing the transport
belts from moving at the 2nd regist unit. If this
error occurs frequently, call your local dealer.
Close all the covers and make sure the
Emergency Stop button is released.
Additional Information
This error may be occurred even you open/close
the cover or turn on/of the Emergency Stop
quickly.
If this error occurs frequently, call your local
dealer.
Turn off the power. Wait about 30 minutes and
turn on the power again. If this error occurs
frequently, call your local dealer.
If this error occurs frequently, call your local
dealer.
Solutions
259