Table of Contents
Advertisement
7-2-2
Replacing the Separator and Suction Rubbers
Replacing the Separator
When the separator is broken, replace it following the procedure below.
1
Turn off the Power switch.
2
Remove two locking screws.
3
Replace the broken separator with
new one.
4
Install the separator in the reverse
order of removal.
Replacing the Suction Rubbers
If the suction rubber is broken or deteriorates, replace it with the new one which is supplied in the
accessories.
1
Turn off the Power switch.
2
Pull out the suction rubber to remove
it from the groove.
3
Install the new suction rubber.
SmartStacker User's Manual
26030
60202B1
Optional Sheet Feeder
Separator
B3-6ZP x 2
26030
60202A1
389
Advertisement
Table of Contents
