Table of Contents
Advertisement
2-4
Starting a Job
1
Click the Start button.
Additional Information
• You can also start by pressing the Start
button on the screen for the SmartStack-
er.
• You can also start by pressing the Start
button on the control panel of the Sheet
Feeder.
➡ The pump runs and the suction head picks
up the top sheet. The sheet is fed and the
machine processes the sheet.
➡ The cut sheets are stacked and delivered
according to the delivery settings.
➡ After the last sheet is processed, the ma-
chines stop. The successfully completed job
moves to the list of Completed jobs.
122
Additional Information
• Select whether or not you want the machine
to deliver at the end of the job by setting the
"Operation After Job Processing" function on
the Main screen of the FLC (Finishing Line
Controller).
• The machine can start the job automatically
only if it has been set up to use a banner
sheet. If you have made a check-mark for
"Run the next job continuously by reading the
banner sheet" on the Setting - Banner screen
of the FLC (Finishing Line Controller), the
machine will read the barcode for the next job
that is loaded on the pallet, do a changeover,
and start processing automatically.
SmartStacker User's Manual
Advertisement
Table of Contents
