Run - Main Screen - Part 2 - Horizon Fitness SmartStacker User Manual

1-2-2

Run - Main Screen - Part 2

1
2
3
4
1
Counter for the Number of Blocks in Each Stack
When the machine is used in an offline system and
is selected for the stack function, the number
of blocks stacked is displayed.
Number of blocks Number of blocks in each stack
already stacked
0 5
2
Number of Blocks in Each Stack
When the machine is used in an offline system and
is selected for the stack function, enter the
number of blocks in each stack.
3
Stack Function On/Off
Use this to set how many blocks should be stacked in the
stacker before the blocks are delivered.
If you are using the machine in an inline system
or a near line system, the setting on the press is
displayed and this function cannot be set from this
screen. If you are using the machine in the offline
mode, set this function on this screen.
SmartStacker User's Manual
pieces/hr
5
Press this button to
clear the number of
blocks which have
already been stacked.
SmartStacker Screen Descriptions
This turns off the stack function. The machine will
continue feeding the uncut sheets until the pages
reach the upper limit of the Merge Stacker.
This turns on the stack function. The
machine will stop after feeding the number
of blocks in one stack.
4
Offset Function On/Off
Use this setting to set whether or not each block is
offset by the stacker.
If you are using the machine in an inline system or a near
line system, the setting on the press is displayed and this
function cannot be set from this screen. If you are using the
machine in the offline mode, set this function on this screen.
The offset function is turned off (straight stacking).
All of the blocks of pages are stacked without any offset.
The offset function is turned on.
One block is offset to the right, and the next
block is offset to the left.
5
Number of Sheets for One Block
Enter the number of sheets for one block.
If you are using the machine in an inline system or a
near line system, the setting on the press is displayed
and this function cannot be set from this screen. If
you are using the machine in the offline mode, set this
function on this screen.
29