Horizon Fitness SmartStacker User Manual page 247

Code
No error code for inverter
(Inverter display: N/A)
3299
An error which does not correspond to any of
the errors 3200 through 3298 has occurred on
the A120 Inverter for 1st Process Unit Transport
Motor.
A210 Gripper Servo Amplifier: 3300-3399
Overcurrent 1
(Amplifier display: oc1)
3301
The output current of the servo amplifier exceeds
the rated value. Direct detection by internal
transistor of servo amplifier
Overcurrent 2
(Amplifier display: oc2)
3302
The output current of the servo amplifier exceeds
the rated value. Indirect detection with software of
servo amplifier
Overspeed
(Amplifier display: oS)
3303
The rotation speed of the servo motor exceeds
1.1 times the maximum speed.
Control power undervoltage
(Amplifier display: Lvc)
3304
The power supplied to the servo amplifier falls
below the minimum specification voltage limit.
Overvoltage
(Amplifier display: Hv)
3305
The DC voltage inside the servo amplifier
exceeds the upper limit.
Encoder trouble 1
(Amplifier display: Et1)
3306
There is a fault in the encoder built in the servo
motor. (Single revolution position detection fault
of encoder)
Encoder trouble 2
(Amplifier display: Et2)
3307
There is a fault in the encoder built in the
servo motor. (Detection is made at the internal
electronic thermal relay of the servo amplifier.)
SmartStacker User's Manual
Description and Causes
If an Error Code Is Displayed on SmartStacker
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
If this error occurs frequently, call your local
dealer.
Solutions
247