Table of Contents
Advertisement
Adjusting the Cutting Positions
5-2-3
Adjusting the Trim Length - Long Edge
If the bleed and gutter trim positions
on all the pages are shifted to the
right or left, adjust the setting here.
Feed
Direction
Doing a test feed using the Adjusting Mode screen
Use the Administrator - Adjusting Mode screen to check if the sheets are being cut correctly. The cut
sheets will stop at the Merge Conveyor. This will make it easier to check the accuracy of the cuts.
192
1
Enter "2."
2
Press the Start button and feed a
sheet.
➡ The sheet is processed through the Second
Process Unit and stopped at the stopper in
the Merge Conveyor.
3
Check whether the sheet has been
cut correctly.
4
If the quality is OK, enter "0" to return
to the normal mode.
SmartStacker User's Manual
Advertisement
Table of Contents
