Table of Contents
Advertisement
If an Error Code Is Displayed on SmartStacker
Code
1st regist unit control board WDT
9140
The CPU on the board has become "lost" in a
program loop.
2nd regist unit control board EEPROM
connection error
There is a problem with the wiring/connection
9210
between the QPM-290 control board and the
QPW-795 EEPROM board.
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
2nd regist unit control board EEPROM loading
error
9211
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
2nd regist unit control board EEPROM saving
error
9212
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
2nd regist unit communication error
9220
The ARCNET communication error occurs in 2nd
regist unit control board.
2nd regist unit PRO24V trip detection
9230
There is a short circuit in the wiring of sensors
and switches.
2nd regist unit control board WDT
9240
The CPU on the board has become "lost" in a
program loop.
Merge conveyor control board
EEPROM connection error
There is a problem with the wiring/connection
9310
between the QPM-290 control board and the
QPW-795 EEPROM board.
The data in the QPW-795 EEPROM board is
damaged.
The QPW-795 EEPROM board is broken.
340
Description and Causes
Solutions
If this error occurs frequently, call your local
dealer.
Turn off the power. Wait about 30 seconds and
turn on the power again. If this error occurs
frequently, call your local dealer.
If this error occurs frequently, call your local
dealer.
SmartStacker User's Manual
Advertisement
Table of Contents
