Horizon Fitness SmartStacker User Manual page 150

Setting the Control Panel - When using the Merge Stacker
4
Set the edge trim function.
If the edge trim function is on
If the edge trim function is off
5
Enter the page size.
Page Length
Page Width
If you enter a value
which is out of
range, the value will
be displayed in red.
6
If the optional scoring mechanism is installed, turn it on or off.
7
Enter the sheet thickness (measured in µm).
150
Enter the edge trim width for the short side
5 to 60 mm or 0.20" to 2.36"
Enter the edge trim width for the long side
5 to 60 mm or 0.20" to 2.36"
No entries for edge trim width
SmartStacker User's Manual