Table of Contents
Advertisement
2
Select job that you want to run.
• There are two ways to select the job.
1. With code on the banner page
Read the code using the handy scanner.
➡ The job ID that matches the banner information is selected from the job list under the Pending
jobs tab on the Run - Main screen of the FLC.
2. On the screen of FLC
Select the job on the screen of FLC.
3
Press
➡ The machine starts the changeover for the selected job.
SmartStacker User's Manual
Handy scanner Supplied with the FLC
to start the changeover.
3
2
Changeover
115
Advertisement
Table of Contents
