Table of Contents
Advertisement
Scoring (option)
Production Speed
User Interface
Automatic/Manual Setup
Parts and Changeover
Time
Sheet Delivery
Sheet Infeed Registration
Stack Delivery Height
SmartStacker User's Manual
Line:
One positive scoring line in the center when the sheet is divided into two at the Second
Process Unit.
Finished Size:
When the optional scoring unit is installed,
the size is limited as follows.
With Scoring :
100 through 381 mm
3.94" through 15"
Without Scoring (Min.) :
148 mm
5.83"
Up to 4,600 sheets per hour
* The production speed will vary depending on the number of cuts and the type and
condition of the sheets.
* When used in an inline configuration, the press may need to slow down depending on
the sheet condition.
12-inch Touch Panel (Mounted on the Merge Conveyor)
Merge Stacker Delivery Button (Mounted on the Merge Stacker)
Emergency Stop Buttons (Mounted on the First Regist Unit, the Second Regist Unit, the
Merge Conveyor, and the Merge Stacker)
Automatic Setup Parts
• Registration guide
• First Process Unit (14 parts)
• Second Process Unit (8 parts)
• Blank page ejection guide
• Scoring rollers (2 parts)
• Stopper guides in 90-degree Turn Conveyor (2 parts)
• Stopper guides in Merge Stacker
• Stopper guide in B2 Stacker
Manual Setup Parts (Necessary to remove these during a slitting operation)
• Gutter trim guides in First Process Unit (6 parts)
• Gutter trim guides in Second Process Unit (3 parts)
Changeover Time
Max. 15 seconds
Stack Delivery, Bypass Conveyor, Delivery Tray and Waste Page Ejection
Infeed registration: Rear
Height registration for inline: 1,000±10 mm or 39.37"±0.39" from the floor
Height registration for near line/offline: 1,020±10 mm or 40.16" ±0.39" from the floor
Merge Stacker: 700±10 mm or 27.6"±0.39" from floor
177.8 through 265 mm
7" through 10.43"
105 mm
4.13"
The scoring is available only when
using the Merge Stacker
Specifications
393
Advertisement
Table of Contents
