Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-15
Run - Diagnostic Tool Screen
Use this screen only when you are requested to do by our service technician. Since the FLC was
installed, it has automatically saved all the logs of operation, status of line and errors. Use this tool to
create a compressed files of a set of logs of the day when an error occurred and also of the past days.
Send the compressed files to the service technician.
1
1
Log Save Range
All: All the logs will be output. All the dates will be
selected.
2 months / 1 month / 1 week / today: The logs of the
dates that are included within the selected term will
be output. The dates within the selected term will be
selected. After the term has been selected, you can
omit any of the selected dates by unchecking it.
None: All the dates will not be selected. Select the date
that you want to output individually.
2
Date to Output
The logs of the date are selected to be output.
94
2
3
4
5
3
Output Button
Click this button after you selected the dates. Select the
file destination and save the file under a new name. A
zip file will be created. Send this zip file to the service
technician.
Return to the FLC Run - Main Screen
As the diagnostic tool is running, the screen returns to
the FLC Run - Main screen.
Exit the Diagnostic Tool
Exit the diagnostic tool and return to the FLC Run -
Main screen.
Additional Information
The buttons that are not explained on this
page are used only by service technician.
SmartStacker User's Manual
4
5
Advertisement
Table of Contents
