Run - Main Screen - Part 9 - Horizon Fitness SmartStacker User Manual

Sheet cutter
Table of Contents

Advertisement

Finishing Line Controller Screen Descriptions
1-3-9

Run - Main Screen - Part 9

1
Memo
Click this icon to enter a memo for the selected job.
The Keyboard screen is displayed. You can write a
reason for holding or aborting a job, or a message to
other operators.
2
Job Status Change
Click this icon to change the status of the selected
job. The Status Change screen is displayed.
3
Completing Job
Click this button to mark as "completed" a job which
is not actually complete. The job will move to the list
of completed jobs. Use this function if one of the last
sheets jams, but reprint is not necessary because
the job includes extra blocks.
4
Aborting Job
This moves the selected job to the list of Held jobs.
88
1 2
3
4
5
6
5
Initializing Job
Click this button to initialize the selected job. The job
will return to the list of Pending jobs. Use this function
to repeat a completed job, or retry a job that was
stopped due to an error.
6
Changing the Start Sheet
This is displayed when the machine is in a near
line system and a job in the list of Pending jobs is
selected.
You can change the sheet to resume feeding.
For example, if the first sheet jams, the FLC judges
to resume the job from the second sheet that
remains on the feeder and displays "Current sheet:
2". If the removed first sheet is not smeared or
damaged and you want to reload it on the feeder,
press the button to change to "-1". The display
changes to "Current sheet: 1"
7
Memo
This displays the content of any memo for the
selected job.
8
Imposition
The imposition image for the selected job is shown
here.
SmartStacker User's Manual
7
8

Advertisement

Table of Contents
loading

Table of Contents