Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-11
Run - Main Screen - Part 11
6
5
2
1
2
1
4
3
Sheet
1
Reprint Blocks
Using this column, you can select the blocks to be
reprinted. Any blocks with red
reprinted. In the example shown above, if you select
the first block, all the sheets included in that block will
also be selected.
2
Reprint Stacks
Using this column, you can select the stacks to be
reprinted. In the example shown above, if you select
the first stack, all the blocks and sheets included in
that stack will also be selected.
3
Save
Click this button to save the settings and close the
reprint list.
4
Print
Click this button to print the reprint job list using the
desktop printer connected with the FLC. The desktop
printer can be changed using the General screen.
5
Cancel
Click this button to cancel any changes made to the
settings and close the reprint list.
90
1
3
4
Block
marks will be
2
5
Stack
6
Start Button
If you are using the machine in a Near Line system,
and the Start button is clicked, the machine will start
the changeover for the selected job.
While the job is running, this button is changed to
Pause button.
7
Pause Button
If the Pause button is clicked, the machine will stop
feeding. (Any sheets already inside the machines will
continue to be processed.) If you want to make fine
adjustments even though a job is running, click this
button to pause the machine.
While the job is being held, this button is changed to
the Start button. To resume feeding, click the Start
button.
Additional Information
You can also pause the machine using the
Stop button on the machine. The machine
will resume the job when you press the
Start button.
SmartStacker User's Manual
6,7
Advertisement
Table of Contents
