Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-17
Setting - General(1) Screen - Part 2
1
1
Job Waiting Time
After the job is completed, the line will be stopped if
the barcode of the next job is not received within the
time entered here.
2
Language Selection
The language used on the display can be changed.
3
Unit Selection
The units used for the values displayed on all of the
screens can be set to mm or inches.
4
Printer
Select the desktop printer used to print the reprint list.
5
Error recovery
During reprint, do you want to reprint by the sheet,
by the stack or by the block.
Stack:
Any reprinting will reprint whole stacks.
For example, if a job includes five blocks, if a
sheet in the third block jams, the system will
reprint the whole stack containing the first two
blocks that were successfully stacked and also
the last two blocks that have not been fed yet.
96
Block:
Any reprinting will reprint whole blocks.
For example, if a job includes five blocks, if
a sheet in the third block jams, the system
will not reprint the sheets for the first two
blocks that were successfully stacked.
(These first two blocks will be delivered to
the uncompleted conveyor.)
Sheet: Any reprinting will reprint by sheet. Only
the jammed sheet is reprinted.
6
Job retention period
If a job has not been run for this set period, it is
deleted from the Completed jobs list, and it is
displayed in red in the Pending jobs list and in the
Held job list. Default is 7 days.
7
Password
You can change the administrator password that is
necessary to enter the Setting screen.
Default is "1111".
SmartStacker User's Manual
2
3
4
5
6
7
Advertisement
Table of Contents
