Table of Contents
Advertisement
Finishing Line Controller Screen Descriptions
1-3-13
Run - Main Screen - Part 13
1
Uncompleted Box Delivered
This mark is shown if a part of job has delivered to
the uncompleted box although the job is finished.
You can also display this mark in Pending jobs tab
or the Held jobs tab depending on the setting. (See
page 101 for details.)
If this mark is displayed, the good stack the sheets
in which are cut correctly may have been delivered
to the uncompleted box. Do not throw away the
stack in the uncompleted box until you check it.
Example 1: There is a banner sheet at the bottom
of the job which will be discarded, and the banner
sheet jammed.
The block after sheet
cutting is complete
is good, however, it
is delivered to the
uncompleted box.
92
Example 2: "Offset" is selected for the operations after
job processing and the completed jobs are stacked,
and the sheets for the next job jammed.
The blocks stacked are
good and the jobs are
complete, however,
they are delivered to
the uncompleted box.
Additional Information
In addition, even if the sheets inside the Smart-
Stacker are not defective, they will be delivered
to the uncompleted box in the following cases;
• If you press the Delivery button of the Merge
Stacker
• If you press the Block Delivery button on the
Run-Main screen of SmartStacker
• If you do a changeover with home positioning
• If you change the finished size and do a
changeover
• If you press the Line Clear button on the Run-
Main screen of FLC
SmartStacker User's Manual
1
Job 1
Job 2
Advertisement
Table of Contents
